6
When you have selected all disks for the IS volume, press E
then exit this menu
then exit this menu
The IS volume exists as soon as you save the changes. The RAID Properties screen now
displays the IS volume properties and status.
Filling empty drive bays
Empty drive bays in the server must be filled by filler panels, empty drive carriers, or empty
drive trays, as appropriate. With the bezel removed, install the appropriate carrier or filler
panel, then replace the bezel by snapping it into place on the front of the server.
. (If you do not want to create the volume, select
.)
www.gateway.com
and select
Save changes,
SC
Discard changes,
75