Replacing the fan module
To replace the fan module:
1
Follow the instructions in
sure you turn off the server, then unplug the power cord and all other cables connected
to the server.
2
Follow the instructions in
3
Disconnect the fan module cable from the left side of the fan module.
4
Pull up on the release tab on the left side of the fan module to release it from the
chassis, then slide the module to the left until it stops.
5
Lift the fan module from the chassis floor and disconnect the fan distribution cable
from the backplane.
6
Remove the fan module from the chassis.
7
Attach the fan distribution cable from the backplane to the new fan module.
"Preventing static electricity discharge" on page
"Opening the server case" on page
www.gateway.com
43. Make
44.
85