Gateway 9515 User Manual page 104

11
Reconnect the main power, CPU power, and power signal cables from the power
distribution module to the system board.
12
Follow the directions in
13
Reconnect the 2×3 power cable to the hot-swap backplane.
14
Reconnect the flat flex cable from the hot-swap backplane to the system board.
15
Reinstall the power supplies by following the instructions in
supply module" on page
16
Reinstall the PCI riser assembly by following the instructions in
installing the PCI riser assembly" on page
17
Follow the instructions in
"Installing the air baffles" on page
94.
79.
"Closing the server case" on page
www.gateway.com
53.
"Replacing a power
"Removing and
46.
99