Securing The Server In The Cabinet - Gateway 960 Installation Manual

Installing Your Gateway Server into a Rackmount Cabinet

Securing the server in the cabinet

Tools you need to complete this task:
Parts you need to complete this task:
I 4 screws (provided by the rackmount cabinet manufacturer)
To secure the server in the rackmount cabinet:
1
Close the back door of the rackmount cabinet, then lock it if necessary.
2
Push the server back into the cabinet until the rackmount handles press
against the cabinet's front vertical mounting rails.
3
Install screws, supplied by the rackmount cabinet manufacturer, into the
four mounting holes on the rackmount handles.
Screws
4
Close the front cabinet door, then lock it if necessary.
24
Phillips screwdriver
www.gateway.com
Screws