Beeper Volume - Intermec 700 Series User Manual

Control Panel Applets
Beeper/LED/Buttons
To access the settings from the 700 Series Computer, tap Start → Settings →
the System tab → the Data Collection icon to access its control panel applet.
Use the right and left arrows to scroll to the Beeper/LED/Buttons tab, then tap
this tab to access its parameters.
Most of these functions are not available when using an imager. The following
table shows which functions are supported either by an imager or by a laser
scanner.
Beeper Function

Beeper Volume

Beeper Frequency
Good Read Beeps
Good Read Beep Duration
Record Button
The following are parameters for features on the700 Series Computer. Note that
these are listed in the order of their appearance.
Beeper Volume
Sets the volume for the good read beep.
Action:
SNMP OID:
Options:
A-32 700 Series Color Mobile Computer User's Manual
Tap the Beeper volume parameter, then select an option to change this
parameter setting.
1.3.6.1.4.1.1963.15.3.1.4.1.6.1
0 Low
1 High (default)
2 Medium
3 Vibrate
APPENDIX A
Laser
Imager Scanner
X X
X
X
X
X X