Telus And Bell Mobility Activation; At Command Interface (760 Computers) - Intermec 730 User Manual

Bell Mobility
Username 10 digit phone
number@1xbell.ca
Password Original Voice Mail system password (usually a 4
digit #) available from activating organizations.
SID 16420
700 Series Color Mobile Computer User's Manual
6 Select Start > Internet Explorer, then tap Pocket Internet Explorer to
choose a web site. Your unit is now successfully activated.
Perform a cold-boot on your 760 Computer to uninstall the Watcher ap-
plication. Watcher is intended for activation purposes only. Use the fol-
lowing to establish and maintain connection to the WAN radio:
S Custom application using Intermec WWAN Toolkit API
S Custom customer application using Connection Manager Interface

Telus and Bell Mobility Activation

Activation of Bell Mobility and Telus are similar to the first portion of the
Sprint activation process. Follow the instructions for manual activation
using the Bell Mobility Watcher.CAB or Telus Watcher.CAB file to install
the applicable application. Enter the activation lock codes and phone num-
bers as requested.

AT Command Interface (760 Computers)

This interface specification is based on the following recommendation:
S ETSI GSM 07.05:
European Digital Cellular Telecommunication System (phase 2)
Use of DTE-DCE interface for Short message and cell broadcast service.
S ETSI GSM 07.07:
European Digital Cellular Telecommunication System (phase 2)
AT command set for GSM Mobile Equipment.
S ITU-T Recommendation V.25 ter
Serial asynchronous automatic dialing and control.
Chapter 4
Telus
10-digit phone
number@1x.telusmobility.com
The 11-digit ESN printed inside the 760 Comput-
er battery compartment, begins with 099.
16422
— Network Support
143