Release 3.1 Upgrade Scenarios - Avaya G700 Installing Manual

Release 3.1 upgrade scenarios

The upgrade procedures are slightly different depending on the upgrade scenario. The main
differences between the scenarios are summarized in
procedures.
Table 14: Release 3.1 upgrade scenarios
Upgrade From
R 1.x
R 2.x
The unshaded cells in this table are the most common and recommended upgrade scenarios.
The shaded cells are scenarios that are unlikely or not recommended.
The new S8300B media server will normally not have Communication Manager software
installed on it. If it does, remastering the hard drive is still recommended but could be replaced
with a standard upgrade.
If the current system has a 2.0.x release of Communication Manager installed, it is possible to
move the hard drive from the S8300A to the S8300B and then upgrade to 3.1. This saves a few
steps but it is not recommended for the following reasons:
If the S8300 A hard drive is not moved, it provides a means to quickly revert to the original
●
configuration, if necessary.
Hardware could be damaged in the process of changing hard drives.
●
Only the Fujitsu hard drives can be moved.
●
The hard drives on the S8300B have a larger capacity than the hard drives on the S8300A.
●
This larger capacity is not needed for R 3.1 but may be needed in the future.
S8300 B Hard Drive has
Remastering Software
Only
Linux Migration backup
Remaster and upgrade
View/Restore Data
Backup Now
Remaster and upgrade
View/Restore Data
Move hard drive from A to B
About upgrading an existing S8300A to R3.1
Table 14 and are noted in the detailed
S8300 B Hard Drive has
R2.x Software Installed
Linux Migration backup
Upgrade
View/Restore Data
Backup Now
Upgrade
View/Restore Data
Upgrade
Issue 9.1 June 2006 227