Configure The G700 - Avaya G700 Installing Manual

Manual installation of a new G700 without an S8300
Table 35: Firmware file formats (continued)
Component
8-port/trunk Analog Media Module
(version 6 or earlier)
8-port/trunk Analog Media Module
(version 7)
8-port/trunk Analog Media Module
(version 20 or later)
4-station/4-CO trunk Analog
Media Module
T1/E1 Media Module
8-port BRI Media Module
2-port BRI Media Module
4. Double-click the file name.
The system displays a File Download window.
5. Click on Save this file to disk.
6. Save the file to the C:\tftp directory (or your alternate tftp location).
7. Use WinZip or another zip file tool to unzip the file, if necessary.

Configure the G700

For a new installation of a G700 Media Gateway, you must complete the following configuration
tasks:
1. Assigning the IP addresses of the G700 media gateway components
2. Setting up the controller list for the G700
550 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server
Firmware Version
Format
mm711<version id>
mm711<version id>
mm711<version id>
mm714<version id>
mm710<version id>
mm720<version id>
mm722<version id>
Example
mm711v17.fdl
mm711h7v24.fdl
mm711h20v68.fdl
mm714v67.fdl
mm710v14.fdl
mm720v6.fdl
mm722v2.fdl
2 of 2