Chapter 6: Upgrading An Existing S8300B To R3.1 Using The Upgrade Tool - Avaya G700 Installing Manual

Chapter 6: Upgrading an existing S8300B to R3.1
This section covers the procedures to use the Upgrade Tool to upgrade the following:
The software on an installed Avaya S8300B Media Server and its LSPs, from a 2.x or 3.0
●
release to 3.1.
The firmware on an installed Avaya G700 Media Gateway.
●
!
Important:
This chapter assumes that the currently installed S8300 is version B running
Important:
Communication Manager release 2.1 or greater. If the currently installed S8300 is
version A, follow the upgrade procedures in
S8300A to R3.1 using the Web
release 2.0 of Communication Manager, follow the upgrade procedures in
Chapter 12: Manual upgrade of an existing S8300B and G700 to R3.1
page 665
!
Important:
These procedures assume that you are upgrading an S8300 primary controller
Important:
and/or any remote LSPs connected to the primary controller. If you are upgrading
an LSP by itself locally, you cannot use the Upgrade Tool. Instead, you must
follow the procedures in
G700 to
using the Upgrade Tool
Chapter 12: Manual upgrade of an existing S8300B and
R3.1.
Chapter 5: Upgrading an existing
pages. If the S8300 is version B, but is running
on
Issue 9.1 June 2006 293