Upgrade An Existing G700 Without An S8300 Using The Upgrade Tool - Avaya G700 Installing Manual

Checklist 5:
Upgrade an Existing G700 without
an S8300 using the Upgrade Tool
Use Checklist 5 to upgrade a G700 Media Gateway with the following characteristics:
The G700 does not have an S8300 and is controlled by an external S8300, S8400, S8500,
●
or S8700-series Media Server.
You will use Chapter 7
G700, see About connection methods
Checklist 5: Task List to Upgrade an Existing G700 without an S8300
Major Tasks
Before going to the customer
site on page 345
On-site preparation for the
upgrade on page 348
Running the upgrade
page 353
136 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server
with this checklist. For help with connecting to and logging in to the
on page 63.
Subtasks
- Get planning forms
- Get the G700 serial number
- Set up TFTP server, if necessary
- Install the Gateway Installation Wizard on laptop
- Download firmware files
- Verify contents of the tftp directory
- Determine which firmware to install
on Using the Upgrade Tool:
- Install firmware on the P330 Stack Processor
- Install firmware on the G700 media gateway
processor
- Install firmware on the media modules
- Install firmware on other G700s in the stack or
network, if any
-Set Rapid Spanning Tree