Avaya G700 Installing Manual page 166

Installing a new G700 with an S8300 using the Avaya Installation Wizard
The IW identifies the Media Gateway serial number and all media modules present. When
configuring a new gateway, click on the Action Icon. This opens four additional screens, which
allows you or the EPW to configure the following:
Media Gateway Processor- identifies the Media Gateway Processor (MGP) to the network
●
Add IP Route - configures additional IP routes on the network
●
Media Gateway Controller List - configures the MGC list and sets LSP transition points. On
●
this screen, a PING test to each of the controllers in the MGC list can be conducted.
VoIP Modules - configures all VoIP engines on the gateway
●
After returning to the IP Addresses screen, a green-circled checkmark signifies that the Media
Gateway has been configured. Click Continue. The Firmware screen displays.
Firmware screen
To check the firmware versions, click the Action Icon. The Firmware - Media Gateway <serial
number> screen displays.
166 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server