Determining Which Firmware To Install On The G700 - Avaya G700 Installing Manual

Manual upgrade of an existing S8300B and G700 to R3.1

Determining which firmware to install on the G700

Conduct the following procedure to compare software versions running on the G700 processors
and media modules with the versions in you planning documents. If the versions do not match,
you need to install the new firmware for those components.
To determine if new firmware for the P330 stack processor is necessary
1. Access the stack processor. See one of the following:
Logging in to the P330 Stack Processor with a Direct Connection to the S8300 Services
●
Port on page 76
Logging in to the P330 Stack Processor with a LAN Connection
●
Logging in to the P330 Stack Processor with a Direct Serial Connection
●
Logging in to the P330 Stack Processor with Device Manager
●
2. At either the P330-1(super)# or P330-1(configure)# prompt, type dir.
The system displays the directory list of software for the P330 stack processor.
Directory list for P300 stack processor
M# file
-- ----
1 module-config
Configuration
1 stack-config
1 EW_Archive
1 Booter_Image
3. Check the version number (ver num) of the EW_Archive file to see if it matches the Release
Letter.
If not, you must upgrade the P330 stack processor.
4. Type show image version
The system displays the list of software.
Show image version List for P330 stack processor
Mod
------
3
3
704 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server
ver num
-------
N/A
N/A
4.0.4
3.2.5
Module-Type
-----------
Avaya G700 media gateway
Avaya G700 media gateway
file type file location
---------- -------------
Running Conf Ram
Running Conf Ram
SW Web Image NV-Ram
SW BootImage NV-Ram
on page 77
on page 78
on page 78
file description
----------------
Module
Stack Configuration
WEB Download
Booter Image
Bank Version
---- -------
A 0.0.0
B 4.0.17