Obtaining Additional Data For Running The Upgrade Tool - Avaya G700 Installing Manual

Upgrading an existing S8300B to R3.1 using the Upgrade Tool
Copy Complete screen
This screen indicates the release just copied, shows the release running on the S8300, and
shows the releases resident on the server's hard drive.
Note:
Did you experience a timeout while downloading from a TFTP or HTTP server? If
Note:
so, you must restart the download.
!
CAUTION:
At this point you are finished with copying the software to the server. If the
CAUTION:
software was on CD-ROM, remove the CD from your laptop now to avoid
possible problems the next time your laptop is rebooted.
8. Repeat this procedure for each LSP you want to upgrade with the Upgrade Tool.

Obtaining additional data for running the Upgrade Tool

To run the Upgrade Tool for upgrading media gateways, you need the following from the
customer:
Logins and passwords for the media gateways, including global logins and passwords and
●
individual media gateway logins and passwords.
IP addresses for any TFTP servers being used.
●
You can use the worksheets in the Job Aid: Upgrade Tool and Worksheets, 555-245-757, to
capture this information.
326 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server