Backing Up S8300 Recovery System Files - Avaya G700 Installing Manual

3. Type stop -s Audix and press Enter to shut down AUDIX. Note that the "A" in Audix
must be capitalized.
The shutdown will take a few minutes.
4. Type watch /VM/bin/ss and press Enter to monitor the shutdown.
The watch command will automatically refresh every few seconds. When the shutdown is
complete, you will see only the voicemail and audit processes. For example:
voicemail:(10)
audit http:(9)
Press Ctrl+C to break out of the watch command.
5. Type /vs/bin/util/vs_status and press Enter to verify that AUDIX is shut down.
When AUDIX is shut down, you will see
voice system is down
!
Important:
After upgrading an S8300, you must upgrade the G700 or G350 and media
Important:
module firmware before restarting IA770.

Backing up S8300 recovery system files

Before installing the S8300 software, back up the system data in case you need to back out of
the upgrade. You should back up to an FTP server on the customer's network. To do this, you
need an FTP address and directory path and a user ID and password to access the customer's
network. Check with your project manager or the customer for this information. You can also
back up the system data to the S8300 hard drive.
To back up S8300 recovery system data
1. Under Data Backup/Restore, click Backup Now.
The Backup Now screen displays.
On-site Preparation for the Upgrade
Issue 9.1 June 2006 683