Pre-Upgrade Tasks - If The S8300 Is The Primary Controller - Avaya G700 Installing Manual

Manual upgrade of an existing S8300A and G700 to R3.1
3. Check the Reports as: field for the release number of the S8300 software.
In this example, the release number is reported as R011x.02.0.524.0. This corresponds to
release 1.2.0.
whether or not a pre-upgrade update is required.
Pre-Upgrade Tasks — If the S8300 is the primary controller
Skip to Backing up system files
!
CAUTION:
If you are upgrading an S8300 primary controller that has LSPs registered to it,
CAUTION:
the LSPs must be upgraded before the primary controller. (You can use the SAT
command, list media-gateway, to see if there are LSPs registered to the S8300.)
604 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server
Table 41 maps the release number to the Reports as: field, and specifies
Table 41: Software Release Numbers
Release Number
Reported as
From:
R011x.01.0.xxx
To:
R011x.01.9.xxx
From:
R011x.02.0.xxx
To:
R011x.03.0.xxx
From:
R011x.03.1.xxx
To:
R011x.03.9.xxx
From:
R012x.00.0.xxx
To:
R012x.00.9.xxx
on page 611, if the S8300 is configured as an LSP.
Release Pre-upgrade
Number update
Required?
1.1.0 to No
1.1.9
1.2.0 to Yes
1.3.0
1.3.1 to No
1.3.9
2.0.0 to No
2.0.9