Printing Interface Setting Reports - Canon iPF680 User Manual

iPF685
DUTY
UNIT:m2
UNIT:sq.f
UNIT:A4 Sheet
UNIT:Letter Sheet

Printing Interface Setting Reports

Printing Interface Setting Reports
You can print an Interface Print report indicating the current interface settings values of the printer.
Printing Interface Print reports
1
Load the paper.
If using sheets, load paper A4/Letter-sized, you will need at least three sheets.
2
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to se-
lect the Settings/Adj. tab (
• If the Tab Selection screen is not displayed, press the Menu button.
Note
3
Press the OK button.
The Set./Adj. Menu is displayed.
4
Press ▲ or ▼ to select Test Print, and then press the OK button.
5
Press ▲ or ▼ to select Interface Print, and then press the OK button.
Confirming Interface Print information
The following information is included in the Interface Print report.
Canon imagePROGRAF iPFxxxx Interface Print
Firm
Boot
MIT(DBF)
MIT(DB)
S/N
Date
EOP Timer
TCP/IPv4 Frame Type
Use DHCP
User's Guide
Counters for maintenance purposes. Needed when service is
requested.
).
Printing Interface Setting Reports
Printer model
Firmware Version
Boot ROM Version
MIT Database Format Version
MIT Database Version
Printer serial number
The date when the interface setup print report was
printed.
Specify the timeout period before cancellation of
print jobs that cannot be received by the printer.
IPv4 settings values.
473