Borderless Printing By Resizing Originals To Match The Paper Size (Mac Os X) - Canon imagePROGRAF iPF6450 User Manual

iPF6450
10
B
Select the Borderless Printing check box to display
the Information dialog box.
11
Select the width of the loaded roll in the Roll Paper Width list—in this case, click 10-in. Roll (254.0mm).
12
Click OK to close the Information dialog box.
13
C
In Borderless Printing Method, click
14
Click Match Page Size in the
15
Confirm the print settings and print as desired.
•
For tips on confirming print settings, see "Confirming Print Settings ."
Note

Borderless Printing by Resizing Originals to Match the Paper Size (Mac OS X)

Borderless Printing by Resizing Originals to Match the Paper Size (Mac OS X)

This topic describes how to enlarge originals before borderless printing to match the paper size, based on the following
example.
If you use an A1 or A2 roll for borderless printing, insert the provided Spacer for Borderless Printing on the Roll Holder.
(See " Loading Rolls on the Roll Holder
If you do not attach the Spacer for Borderless Printing, the Platen may be soiled from borderless printing.
•
When borderless printing is used, the edge of the paper is cut during printing. Thus, ink density may be uneven at the edges.
If you require higher image quality, select No from the Automatic Cutting list in the Paper Detailed Settings dialog box. In
Important
this case, the paper can be printed without borders on the left and right sides only. Once printed and cut, please cut the
upper and lower bands with scissors.
• Document: Any type
• Page size: 10×12 inches (254.0×304.8 mm)
Paper: Roll
•
• Paper type: Canon Heavyweight Coated Paper
• Roll paper width: 10 inches (254.0 mm)
User's Guide
Borderless Printing by Resizing Originals to Match the Paper Size (Mac OS X)
D
Fit Paper Size.
G
Paper Size list.
")
→P.533
→P.180
101