Turn On The Media Take-Up Unit; Borderless Printng Not Possible; Paper Position Not Suitable For Borderless Printing - Canon ipf8300 User Manual

Error Message >

Turn on the media take-up unit.

The Media Take-up Unit was off when you selected Enable for Take-up Reel.

Borderless printng not possible.

The print job received specifies a
type or width of paper that is not
compatible with borderless print-
ing.
The loaded paper is a size not
compatible with borderless print-
ing.
13

Paper position not suitable for borderless printing.

1092
Because paper expands or contracts
depending on the environment of use,
it may become narrower or wider
than the supported width for border-
less printing.
Turn on the media take-up unit.
Downloaded from ManualsPrinter.com Manuals
Messages regarding paper >
Cause
Cause
Follow these steps to change the settings of the print job to enable borderless print-
ing.
1. Press ▲ or ▼ to select Stop Printing, and then press the OK button.
2. Make sure the correct printer driver for the printer is selected and try printing
again.
For information on types of paper compatible with borderless printing, refer to
the Paper Reference Guide.
Select None when you have set Detect Mismatch on the control panel to Warn-
ing.
However, note that this error may cause paper jams and affect the printing quality.
Press ▲ or ▼ to select Print With Border, and then press the OK button to con-
tinue printing. The document will be printed with a border.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Replace the paper with paper compatible for borderless printing as follows.
1. Press ▲ or ▼ to select Change Paper, and then press the OK button.
2. Replace the paper with paper compatible for borderless printing.
The printer now starts printing the print job.
For information on types of paper compatible with borderless printing, refer to
the Paper Reference Guide.
Press ▲ or ▼ to select Print With Border, and then press the OK button to con-
tinue printing. The document will be printed with a border.
Cause
Corrective Action
(See "Types of Paper.")
→P.768
(See "Removing the Roll from the Printer.")
(See "Removing the Roll Holder from Rolls.")
(See "Attaching the Roll Holder to Rolls.")
(See "Loading Rolls in the Printer.")
(See "Types of Paper.")
→P.768
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Use each type of paper only where the recommended environmental condi-
tions are met. For details on environmental conditions for various paper, see
the Paper Reference Guide.
(See "Types of Paper.")
→P.768
Select None when you have set Detect Mismatch in the Control Panel menu
to Warning.
Corrective Action
Turn the Media Take-up Unit on.
→P.786
→P.789
→P.774
→P.777
Corrective Action
iPF8300