Change the default drying time
Introduction
You can change the drying time with a percentage of the default drying time. For
example, when you set the default drying time for Premium coated paper, under the
conditions used in the table above, to 200%, the drying time will be 0'40".
How to change the default drying time
Open the Océ Settings Editor application.
1.
Go to the setting Key Operator - Printer - Media - Drying time correction.
2.
Select the required media type.
3.
Define the required percentage.
4.
Press 'Apply'
5.
Note: See
drying times per media type.
(see 'Typical drying times' on page
Change the default drying time
284) to get an overview of the typical
153