Station Name - Standard Horizon MATRIX GX2100 Owner's Manual

13.8 STATION NAME

This function allows you to change the name of the radio or second station
microphone. Example: "Radio - Cabin", "RAM1 - Flybridge".
1. Press and hold down the [ CALL ( MENU )] key until
"Setup Menu" appears.
2. Rotate the CHANNEL knob to select "CH FUNCTION
SETUP".
3. Press the [ SELECT ] soft key, then select "STATION
NAME" with the CHANNEL knob.
4. Press the [ SELECT ] soft key.
5. With the second station microphone connected, ro-
tate the CHANNEL knob to select the Unit ("Radio"
or "RAM1") to be named, then press the [ ENT ] soft
key.
6. Rotate the CHANNEL knob to scroll through the first
letter of the new channel name.
7. Press the [ ENT ] soft key to store the first letter in
the name and step to the next letter to the right.
8. Repeat step 6 and 7 until the name is complete.
The name can consist of up to 8 characters, if you
do not use all 8 characters press the [ ENT ] soft key
to move to the next space. This method can also be
used to enter a blank space in the name. If a mis-
take was made entering in the name repeat pressing the [ BACK ] key until
the wrong character is selected, then rotate the CHANNEL knob to correct
the entry.
9. Press and hold the [ ENT ] soft key to enter the name.
10. If you want to enter the name of the connected RAM3 or Radio, repeat
steps 5 through 9.
11. Press the [ QUIT ] soft key several times to return to radio operation.
GX2000/GX2100 Page 93