Transmitting A Group Call - Standard Horizon HX890E Owner's Manual

10.5.2 Transmitting a Group Call

Group Call using the Group Directory
Press

key
(
1. Press the [CH▼]/[CH▲] key to select
"HISTORY" or "MEMORY".
2. Press the [SELECT] soft key, then press
the [CH▼]/[CH▲] key to select a group you
want to contact.
3. Press the [SELECT] soft key, press the
[CH▼]/[CH▲] key to select the operating
channel you want to communicate on, then
press the [SELECT] soft key. To select an
operating channels from all the voice chan-
nels, press the [MANUAL] soft key.
4. Press the [YES] soft key to transmit the
group call signal.
5. When the group call signal is sent, the
display will be as shown in the illustration
at the right.
6. After the group call is transmitted, all the
radios in the group will switch to the desig-
nated channel.
7. Listen to the channel to make sure it is not
busy, then press the PTT button and call the
other vessels you desire to communicate
with.
48
/ / / key)
SELECT
GROUP
 
( key)
HISTORY
MEMORY
NEW ID
BACK
BACK

( / key)
GROUP CALL
GROUP CALL
KARENS
Team BOB
SELECT
066901254
Horizon-Group
Standard-Group
GROUP CALL
Horizon-1G
INTERSHIP CH
USCG Group
06
CH: BACK
08
CH:
09
CH:
GROUP CALL
10
CH:
13
CH:
CATEG:
MANUAL SELECT
GROUP CALL
Do you want to
087654321
transmit a Call?
Horizon-Group
YES
ROUTINE
CATEG:
06
CH:
GROUP CALL
transmitting
CATEG:
SINCE:
SELECT
( key)
HISTORY
SELECT
087654321
Horizon-Group
ROUTINE
06
CH:
NO
087654321
Horizon-Group
ROUTINE
06
CH:
00:05
Transmitted
QUIT