Maintenance
Printhead Cleaning
1
Open the front and right-hand doors.
Intermec EasyCoder 501 XP – User's Guide
Cleaning the printhead on a regular basis is important for the
life of the printhead and for the printout quality. You should
clean the printhead each time you replace the media. This section
describes how to clean the printhead using cleaning cards. If
additional cleaning is required, for example removing adhesive
residue from the platen roller or tear bar, use a cotton swab
moistened with isopropyl alcohol.
Isopropyl alcohol [(CH
mable, moderately toxic, and mildly irritating substance.
1
Turn the printhead lift lever to "Open" position.
Warning!
)
CHOH; CAS 67-63-0] is a highly fl am-
3
2
Chapter 11
79
Need help?
Do you have a question about the EasyCoder 501 XP and is the answer not in the manual?
Questions and answers