Chapter 7
Setup Mode
Entering Setup Mode at Installation
60
The method of entering the Setup Mode depends on which startup
fi les are stored in the printer's memory, a subject that was more
thoroughly discussed in Chapter 3, "Starting Up."
EasyCoder 501 XP with Intermec Shell
• Switch on the power.
• When the display shows the message "Enter=Shell; x sec...",
press <Enter>.
• Press <Setup> (this facility can be used anywhere within
Intermec Shell).
• Set up the printer as described in this chapter.
• Return to Intermec Shell by pressing <Setup>.
EasyCoder 501 XP with a custom-made application program
• Normally, there is no need to enter the Setup Mode for
custom-made application programs. Necessary provisions for
changing the setup, manually or automatically, should be
provided by the program.
Intermec EasyCoder 501 XP – User's Guide