Intermec EasyCoder 501 XP User Manual page 68

Chapter 7 Setup Mode
Setup Mode Overview, Part 5
(Intermec Fingerprint v7.61)
If an optional an EasyLAN 100i interface board is installed in the printer, additional menus will be displayed.
SETUP:
Standard Setup Mode
SER-COM, UART1 See Overview Part 1
SETUP:
NET-COM, NET1
SETUP: Standard Setup Mode
See Overview Part 1
FEEDADJ
SETUP: Standard Setup Mode
See Overview Part 2
MEDIA
SETUP:
Standard Setup Mode
PRINT DEFS
See Overview Part 2
SETUP:
NETWORK
• Press <Setup> to exit the Setup Mode.
66
NET-COM,NET1:
NEW LINE
NETWORK:
IP SELECTION
NEW LINE:
CR/LF
LF
CR
IP SELECTION:
MANUAL
DHCP
BOOTP
RARP
NETWORK:
IP ADDRESS
NETWORK:
NETMASK
NETWORK:
DEFAULT ROUTER
Intermec EasyCoder 501 XP – User's Guide
Use <.> and <0> - <9>
IP ADDRESS:
to set IP address.
192.168.1.79
Use <C> to erase.
Use <.> and <0> - <9>
NETMASK:
to set netmask.
255.255.255.0
Use <C> to erase
Use <.> and <0> - <9>
DEFAULT ROUTER:
to set default router.
192.168.1.1
Use <C> to erase.