Intermec EasyCoder 501 XP User Manual page 31

Peel-Off, cont.
3
2.
Pull out the green clip (1) on the liner takeup hub
and dispose of any wound-up liner (2.)
5a
Fit a new media roll on the media supply hub and
push the roll inwards as far as it will go.
Intermec EasyCoder 501 XP – User's Guide
4
1.
Remove any core from the media supply hub.
5b
In case of media roll with a 76 mm (3-inch) core,
Chapter 4
fi rst fi t an adapter on the media supply hub.
Media Load
29