Intermec EasyCoder 501 XP User Manual page 71

Starting with Intermec Shell, cont.
Select Application
1
/. When an application program
is started, it may automatically
change the communication
setup. For example, Intermec
LabelShop changes the setup
to the following values:
Baud rate:
Char. length:
Parity:
Stopbits:
RTS/CTS:
ENQ/ACK:
XON/XOFF:
New line:
Receive buffer:
Transmit buffer: 600
If another application is selected
later, this communication setup
will remain valid, unless the new
application includes instruc-
tions that automatically change
the setup. The setup could also
be changed manually in the
Setup Mode.
Intermec EasyCoder 501 XP – User's Guide
In Intermec Shell, the menus present the option in infi nite loops,
To see all menus and options, refer to the overview in this chapter.
The Select application lets you choose an application program
that resides in the printer's memory:
• Current appl. starts the last selected application (by default
Intermec Fingerprint with "uart1:" selected as standard I/O
channel).
• LabelShop sets up the printer
LabelShop label formatting programs for Microsoft Windows.
This option requires that you also select a standard IN/OUT
channel, which is the channel you want to use for com-
munication between the printer and the computer. Refer to
the Intermec LabelShop manuals.
57600
• Windows Driver selects the "centronics:" interface as stan-
8
dard IN channel. Use the Intermec Windows Driver to print
None
from most programs run under Microsoft Window. (To run
1
the Intermec InterDriver, use the Fingerprint option).
Enable
• Fingerprint is used to create, modify, or run programs written
Disable
in the Intermec Fingerprint programming language and to
Disable
run the Intermec InterDriver. This option requires that you
CR/LF
also select a standard IN/OUT channel, which is the channel
600
you want to use for communication between the printer and
the computer. Normally, you select "uart1:". Refer to the
Intermec Fingerprint manuals.
• Direct Protocol is an easy-to-use printer protocol for down-
loading label formats and variable input data to a printer from
a host computer. This option requires that you also select a
standard IN/OUT channel, that is the serial channel you want
to use for communication between the printer and the host.
Normally, you select "uart1:". Refer to the Intermec Direct
Protocol v7.xx manual.
• LINE-ALY.PRG (Line Analyzer) is a Fingerprint program
that captures characters received by the printer on a com-
munication channel and prints them on labels. (See later in
this chapter.)
• Other Application Programs
If the printer contains any other application programs, these
will presented as additional options.
Chapter 8 Intermec Shell Startup Program
1
for the various Intermec
69