Intermec EasyCoder 501 XP User Manual page 44

Chapter 5 Thermal Transfer Printing
Ribbon Load, cont.
5c
In case of 110 mm (4.3 inches) ribbon width,
compress the ribbon supply bobbin and move it so it
snaps into the 3:rd groove.
7
Without releasing the ribbon, turn the printhead lift
lever to "Closed" position to lock the ribbon.
42
110 mm
(4.3")
#3
6
2.
Press the ribbon roll onto the ribbon supply bobbin
(1) and route the ribbon through the print unit. Pull
out 20 cm (8 inches) of ribbon (2.)
8
Press the cardboard core at the front end of the ribbon
onto the rewind hub. During printing, both hubs
should rotate counterclockwise.
Intermec EasyCoder 501 XP – User's Guide
1.