Intermec EasyCoder 501 XP User Manual page 22

Chapter 4 Media Load
Tear-Off, cont.
3
Remove any core from the media supply hub.
4b
In case of media roll with a 76 mm (3-inch) core,
fi rst fi t an adapter on the media supply hub.
20
4a
Fit a new roll of media on the media supply hub and
push the roll inwards as far as it will go.
5
Route the media underneath the slack absorber and
forward towards the print unit. The slack absorber
can be rotated for better access.
Intermec EasyCoder 501 XP – User's Guide