Intermec EasyCoder 501 XP User Manual page 37

Internal Batch Takeup, cont.
6b
In case of media roll with a 76 mm (3-inch) core,
fi rst fi t an adapter on the media supply hub.
8
Route the media through the print unit and push it
inwards as far as it will go.
Intermec EasyCoder 501 XP – User's Guide
7
Route the media underneath the slack absorber and
forward towards the print unit. The slack absorber
can be rotated for better access.
9
Pull out approximately 40 cm (15 inches) of labels.
Chapter 4 Media Load
35