Intermec EasyCoder 501 XP User Manual page 43

Ribbon Load, cont.
3
In case of ribbon reload, remove any used ribbon
and empty ribbon core.
5a
60 mm
(2.3")
#1
In case of ribbon up to 60 mm (2.3 inches) wide,
compress the ribbon supply bobbin and move it so it
snaps into the fi rst (innermost) groove.
Intermec EasyCoder 501 XP – User's Guide
Chapter 5 Thermal Transfer Printing
4
Unpack a roll of original Intermec thermal transfer
5b
88 – 90 mm
#2
In case of 88 to 90 mm (3.5 inches) ribbon width,
compress the ribbon supply bobbin and move it so it
snaps into the 2:nd groove.
ribbon.
(3.5")
41