Media Load
Tear-Off (Straight-through)
1
Open the front and right-hand doors.
Intermec EasyCoder 501 XP – User's Guide
The EasyCoder 501 XP can print on labels, tickets, tags, and
continuous stock in various forms. This section describes the case
when the media is torn off manually against the printer's tear bar.
This method is also known as "straight-through printing."
Use the <Feed> key (see fi gure #11) when loading the same
type of media. When switching to a new type of media, or if
the printer does not feed out the media properly, simultaneously
press the <Shift> and <Feed> keys to perform a "testfeed."
Tear-off can be used for:
• Non-adhesive continuous stock
• Self-adhesive continuous stock with liner
• Self-adhesive labels with liner
• Tickets with gaps, with or without perforations
• Tickets with black marks, with or without perforations
An optional label taken sensor can hold the printing of the next
copy in the batch until the present copy has been removed, see
Chapter 9, "Options."
2
Turn the printhead lift lever to "Open" position.
Chapter 4
19