Chapter 40 Auto Provision
40.3 Auto Provision Advanced Screen
Use this screen to configure the feature key settings and firmware upgrade URLs for the snom VoIP
devices connected to the ISG50. To access this screen, click Configuration > PBX > Auto
Provision > Auto Provision Advanced then click the snom Feature Key Setting button.
Figure 388 Configuration > PBX > Auto Provision > Auto Provision Advanced
Each field is described in the following table.
Table 221 Configuration > PBX > Auto Provision > Auto Provision Advanced
LABEL
Feature Key
Settings
Active
Type
578
DESCRIPTION
This list corresponds to the special feature keys on a snom VoIP phone.
Select either On or Off to enable or disable a key code for the feature key in
question.
Select a feature key action from this list. This only applies to the feature key if
you made it active.
For more information on feature key codes and their associated actions, see
Section 27.3 on page
433.
ISG50 User's Guide