Edit Log On Usb Storage Setting - ZyXEL Communications ISG50-ISDN User Manual

53.3.3 Edit Log on USB Storage Setting

The Edit Log on USB Storage Setting screen controls the detailed settings for saving logs to a
connected USB storage device. Go to the Log Setting Summary screen (see
page 708, and click the USB storage Edit icon.
Figure 484 Configuration > Log & Report > Log Setting > Edit (USB Storage)
The following table describes the labels in this screen.
Table 286 Configuration > Log & Report > Log Setting > Edit (USB Storage)
LABEL
Duplicate logs to
USB storage (if
ready)
Active Log
Selection
#
Log Category
ISG50 User's Guide
DESCRIPTION
Select this to have the ISG50 save a copy of its system logs to a connected USB storage
device. Use the Active Log section to specify what kinds of messages to include.
Use the Selection drop-down list to change the log settings for all of the log categories.
disable all logs (red X) - do not send the remote server logs for any log category.
enable normal logs (green check mark) - send the remote server log messages and
alerts for all log categories.
enable normal logs and debug logs (yellow check mark) - send the remote server log
messages, alerts, and debugging information for all log categories.
This field is a sequential value, and it is not associated with a specific entry.
This field displays each category of messages. The Default category includes debugging
messages generated by open source software.
Chapter 53 Log and Report
Section 53.3.1 on
713