The Packet Capture Screen - ZyXEL Communications ISG50-ISDN User Manual

Integrated service gateway

Hide thumbs Also See for ISG50-ISDN:

Table of Contents

56.3 The Packet Capture Screen

Use this screen to capture network traffic going through the ISG50's interfaces. Studying these

packet captures may help you identify network problems. Click Maintenance > Diagnostics >

Packet Capture to open the packet capture screen.

Note: New capture files overwrite existing files of the same name. Change the File Suffix

field's setting to avoid this.

Figure 502 Maintenance > Diagnostics > Packet Capture

The following table describes the labels in this screen.

Table 296 Maintenance > Diagnostics > Packet Capture

ISG50 User's Guide

Enabled interfaces (except for virtual interfaces) appear under Available

Interfaces. Select interfaces for which to capture packets and click the

right arrow button to move them to the Capture Interfaces list. Use the

[Shift] and/or [Ctrl] key to select multiple objects.

Select the protocol of traffic for which to capture packets. Select any to

capture packets for all types of traffic.

Select a host IP address object for which to capture packets. Select any to

capture packets for all hosts. Select User Defined to be able to enter an IP

Chapter 56 Diagnostics