Edit Group Management Associations - ZyXEL Communications ISG50-ISDN User Manual

Integrated service gateway

Hide thumbs Also See for ISG50-ISDN:

Table of Contents

33.2.1 Edit Group Management Associations

Use this screen to configure links from an authority group or an outbound line group to authority

groups, or LCRs configured on the ISG50. To access this screen, select the group you want to

configure in the Configuration > PBX > Group Management screen and click Edit.

Figure 352 Configuration > PBX > Group Management > Edit

Each field is described in the following table.

Table 187 Configuration > PBX > Group Management > Edit

ISG50 User's Guide

This field is a sequential value, and it is not associated with a specific entry.

This field displays the name of an authority group or LCR to which you can configure a

This field displays the description of the group to which you can create a link.

This field identifies whether you are creating a link to:

Authority Group - another set of extensions on the ISG50.

LCR - an outbound dialing rule containing outbound line groups.

Select this to link a group you are configuring to another group. Clear it to remove a link

between the group you are configuring and another group.

Click OK to save your customized settings and exit this screen.

Click Cancel to exit this screen without saving.

Chapter 33 Group Management