General Tutorials; Chapter 7 General Tutorials; How To Configure Interfaces, Port Roles, And Zones - ZyXEL Communications ISG50-ISDN User Manual

Integrated service gateway

Hide thumbs Also See for ISG50-ISDN:

Table of Contents

Here are examples of using the Web Configurator to configure general settings in the ISG50. See

Chapter 8 on page 135

Note: The tutorials featured here require a basic understanding of connecting to and using the Web

Configurator, see

Technical Reference on page

This tutorial shows how to configure Ethernet interfaces, port roles, and zones for the following

example configuration (see

• You want to be able to apply security settings specifically for all VPN tunnels so you add them to

the IPSec_VPN zone.

• The wan1 interface uses a static IP address of 1.2.3.4.

• Add P4 to the dmz interface. The dmz interface is used for a protected local network. It uses IP

address 192.168.3.1 and has a DHCP server.

Figure 71 Ethernet Interface, Port Roles, and Zone Configuration Example

ISG50 User's Guide

for how to configure PBX settings.

Chapter 3 on page 43

for details. For field descriptions of individual screens, see

Section 6.3.2 on page 93

General Tutorials

for the default configuration).