ZyXEL Communications ISG50-ISDN User Manual page 717

names).To access this screen, go to the Log Settings Summary screen (see
page 708), and click the Active Log Summary button.
Figure 486 Active Log Summary
This screen provides a different view and a different way of indicating which messages are included
in each log and each alert. Please see
(The Default category includes debugging messages generated by open source software.)
The following table describes the fields in this screen.
Table 288 Configuration > Log & Report > Log Setting > Active Log Summary
LABEL
System Log
USB Storage
ISG50 User's Guide
Section 53.3.2 on page
DESCRIPTION
Use the System Log drop-down list to change the log settings for all of the log categories.
disable all logs (red X) - do not log any information for any category for the system log
or e-mail any logs to e-mail server 1 or 2.
enable normal logs (green check mark) - create log messages and alerts for all
categories for the system log. If e-mail server 1 or 2 also has normal logs enabled, the
ISG50 will e-mail logs to them.
enable normal logs and debug logs (yellow check mark) - create log messages, alerts,
and debugging information for all categories. The ISG50 does not e-mail debugging
information, even if this setting is selected.
Use the USB Storage drop-down list to change the log settings for saving logs to a
connected USB storage device.
disable all logs (red X) - do not log any information for any category to a connected USB
storage device.
enable normal logs (green check mark) - create log messages and alerts for all
categories and save them to a connected USB storage device.
enable normal logs and debug logs (yellow check mark) - create log messages, alerts,
and debugging information for all categories and save them to a connected USB storage
device.
Chapter 53 Log and Report
Section 53.3.1 on
710, where this process is discussed.
717