The Session Limit Add/Edit Screen - ZyXEL Communications ISG50-ISDN User Manual

Integrated service gateway

Hide thumbs Also See for ISG50-ISDN:

Table of Contents

Table 119 Configuration > Firewall > Session Limit (continued)

Rule Summary

23.3.1 The Session Limit Add/Edit Screen

Click Configuration > Firewall > Session Limit and the Add or Edit icon to display the Firewall

Session Limit Edit screen. Use this screen to configure rules that define a session limit for specific

users or addresses.

Figure 245 Configuration > Firewall > Session Limit > Edit

ISG50 User's Guide

This table lists the rules for limiting the number of concurrent sessions hosts can

Click this to create a new entry. Select an entry and click Add to create a new

entry after the selected entry.

Double-click an entry or select it and click Edit to open a screen where you can

modify the entry's settings.

To remove an entry, select it and click Remove. The ISG50 confirms you want to

remove it before doing so.

To turn on an entry, select it and click Activate.

To turn off an entry, select it and click Inactivate.

To change a rule's position in the numbered list, select the rule and click Move to

display a field to type a number for where you want to put that rule and press

[ENTER] to move the rule to the number that you typed.

The ordering of your rules is important as they are applied in order of their

This icon is lit when the entry is active and dimmed when the entry is inactive.

This is the index number of a session limit rule. It is not associated with a specific

This is the user name or user group name to which this session limit rule applies.

This is the address object to which this session limit rule applies.

This displays the information entered to help identify this rule.

This is how many concurrent sessions this user or address is allowed to have.

Click Apply to save your changes back to the ISG50.

Click Reset to return the screen to its last-saved settings.

Chapter 23 Firewall