ZyXEL Communications ISG50-ISDN User Manual page 697

A window displays prompting you to store the host key in you computer. Click Yes to continue.
3
Figure 473 SSH Example 1: Store Host Key
Enter the password to log in to the ISG50. The CLI screen displays next.
52.8.5.2 Example 2: Linux
This section describes how to access the ISG50 using the OpenSSH client program that comes with
most Linux distributions.
Test whether the SSH service is available on the ISG50.
1
Enter "telnet 192.168.1.1 22" at a terminal prompt and press [ENTER]. The computer
attempts to connect to port 22 on the ISG50 (using the default IP address of 192.168.1.1).
A message displays indicating the SSH protocol version supported by the ISG50.
Figure 474 SSH Example 2: Test
$ telnet 192.168.1.1 22
Trying 192.168.1.1...
Connected to 192.168.1.1.
Escape character is '^]'.
SSH-1.5-1.0.0
Enter "ssh –1 192.168.1.1". This command forces your computer to connect to the ISG50 using
2
SSH version 1. If this is the first time you are connecting to the ISG50 using SSH, a message
displays prompting you to save the host information of the ISG50. Type "yes" and press [ENTER].
Then enter the password to log in to the ISG50.
Figure 475 SSH Example 2: Log in
$ ssh –1 192.168.1.1
The authenticity of host '192.168.1.1 (192.168.1.1)' can't be established.
RSA1 key fingerprint is 21:6c:07:25:7e:f4:75:80:ec:af:bd:d4:3d:80:53:d1.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.1.1' (RSA1) to the list of known hosts.
Administrator@192.168.1.1's password:
The CLI screen displays next.
3
ISG50 User's Guide
Chapter 52 System
697