Internet Access: Pppoe - ZyXEL Communications ISG50-ISDN User Manual

Chapter 4 Installation Setup Wizard

4.1.3 Internet Access: PPPoE

Note: Enter the Internet access information exactly as given to you by your ISP.
Figure 38 Internet Access: PPPoE Encapsulation
4.1.3.1 ISP Parameters
• Type the PPPoE Service Name from your service provider. PPPoE uses a service name to identify
and reach the PPPoE server. You can use alphanumeric and -_@$./ characters, and it can be up
to 64 characters long.
• Authentication Type - Select an authentication protocol for outgoing connection requests.
Options are:
• CHAP/PAP - Your ISG50 accepts either CHAP or PAP when requested by the remote node.
• CHAP - Your ISG50 accepts CHAP only.
• PAP - Your ISG50 accepts PAP only.
• MSCHAP - Your ISG50 accepts MSCHAP only.
• MSCHAP-V2 - Your ISG50 accepts MSCHAP-V2 only.
• Type the User Name given to you by your ISP. You can use alphanumeric and -_@$./ characters,
and it can be up to 31 characters long.
• Type the Password associated with the user name. Use up to 64 ASCII characters except the []
and ?. This field can be blank.
• Select Nailed-Up if you do not want the connection to time out. Otherwise, type the Idle
Timeout in seconds that elapses before the router automatically disconnects from the PPPoE
server.
4.1.3.2 WAN IP Address Assignments
• WAN Interface: This is the name of the interface that will connect with your ISP.
• Zone: This is the security zone to which this interface and Internet connection will belong.
• IP Address: Enter your (static) public IP address. Auto displays if you selected Auto as the IP
Address Assignment in the previous screen.
62
ISG50 User's Guide