The Http Redirect Edit Screen - ZyXEL Communications ISG50-ISDN User Manual

Integrated service gateway

Hide thumbs Also See for ISG50-ISDN:

Table of Contents

Note: You can configure up to one HTTP redirect rule for each (incoming) interface.

Figure 219 Configuration > Network > HTTP Redirect

The following table describes the labels in this screen.

Table 104 Configuration > Network > HTTP Redirect

Proxy Server

19.2.1 The HTTP Redirect Edit Screen

Click Network > HTTP Redirect to open the HTTP Redirect screen. Then click the Add or Edit

icon to open the HTTP Redirect Edit screen where you can configure the rule.

Figure 220 Network > HTTP Redirect > Edit

ISG50 User's Guide

Click this to create a new entry.

Double-click an entry or select it and click Edit to open a screen where you can

modify the entry's settings.

To remove an entry, select it and click Remove. The ISG50 confirms you want to

remove it before doing so.

To turn on an entry, select it and click Activate.

To turn off an entry, select it and click Inactivate.

This field is a sequential value, and it is not associated with a specific entry.

This icon is lit when the entry is active and dimmed when the entry is inactive.

This is the descriptive name of a rule.

This is the interface on which the request must be received.

This is the IP address of the proxy server.

This is the service port number used by the proxy server.

Click Apply to save your changes back to the ISG50.

Click Reset to return the screen to its last-saved settings.

Chapter 19 HTTP Redirect