ZyXEL Communications ISG50-ISDN User Manual page 380

Chapter 24 IPSec VPN
To access this screen, click Configuration > VPN > Network > IPSec VPN > VPN Gateway.
The following screen appears.
Figure 251 Configuration > VPN > IPSec VPN > VPN Gateway
Each field is discussed in the following table. See
Table 125 Configuration > VPN > IPSec VPN > VPN Gateway
LABEL
Add
Edit
Remove
Activate
Inactivate
Object References
#
Status
Name
My address
Secure Gateway
VPN Connection
Apply
Reset
380
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to open a screen where you can
modify the entry's settings.
To remove an entry, select it and click Remove. The ISG50 confirms you want
to remove it before doing so.
To turn on an entry, select it and click Activate.
To turn off an entry, select it and click Inactivate.
Select an entry and click Object References to open a screen that shows
which settings use the entry. See
This field is a sequential value, and it is not associated with a specific VPN
gateway.
The activate (light bulb) icon is lit when the entry is active and dimmed when
the entry is inactive.
This field displays the name of the VPN gateway
This field displays the interface or a domain name the ISG50 uses for the VPN
gateway.
This field displays the IP address(es) of the remote IPSec routers.
This field displays VPN connections that use this VPN gateway.
Click Apply to save your changes back to the ISG50.
Click Reset to return the screen to its last-saved settings.
Section 24.3.1 on page 381
Section 12.3.2 on page 246
for more information.
for an example.
ISG50 User's Guide