Table of Contents
Advertisement
In the web configurator, click Configuration > PBX > Extension Management > Authority
1
Group to open the Authority Group screen.
Click the Add icon to open the Add screen. Enter the name of the group (Basic in this example)
2
and type 1-5 digits to use as an ID for this authority group (345 here). Click OK.
The Edit Authority Group Basic screen displays. Click Batch Add SIP Peer to configure multiple
3
SIP accounts at the same time.
The Batch Add SIP Peer screen opens. The SIP extension number and any configured SIP Auth.
4
Password prefix and/or postfix make up the SIP password. The SIP password must be at least four
digits. This example uses ten four-digit SIP extensions 1001 - 1010 that are also used as the SIP
usernames. The SIP passwords are comprised of the combination of Prefix + Extension +
Postfix. In this example, the SIP Auth. Password Prefix value is 11 and the Postfix value is 99.
ISG50 User's Guide
Chapter 8 PBX Tutorials
137
Advertisement
Table of Contents
Troubleshooting
