Before You Begin; Group Management Screen - ZyXEL Communications ISG50-ISDN User Manual

Integrated service gateway

Hide thumbs Also See for ISG50-ISDN:

Table of Contents

Chapter 33 Group Management

33.1.3 Before You Begin

Before you start to configure a group management, you need to do the following.

• Configure authority group(s). See

• Configure outbound line group(s) and the corresponding auto-attendant settings. See

30.2 on page

Use this screen to view and manage the associations for the authority and outbound line groups

configured on the ISG50. To access this screen, click Configuration > PBX > Group

Figure 351 Configuration > PBX > Group Management

Each field is described in the following table.

Table 186 Configuration > PBX > Group Management

Section 29.2 on page

Double-click an entry or select it and click Edit to open a screen where you can modify it.

This field is a sequential value, and it is not associated with a specific entry.

This is the type of group on the ISG50 to which this entry belongs:

Authority Group - These are the authority groups containing extensions on the

SIP Trunk - These are outside lines to a SIP server at your VoIP service provider.

Trusted - These are outside lines to another SIP server (for example another ISG50)

that has configured your ISG50 as a trusted peer.

FXO Trunk - These are outside lines via the FXO ports on the ISG50.

BRI Trunk - This refers to a connection from the ISG50 to the basic rate ISDN trunk

line via the BRI port on the ISG50.

This field displays the name of a group (authority group or an outbound line group).

This field displays the description of this group.

ISG50 User's Guide