Configuring The Call Park Screen - ZyXEL Communications ISG50-ISDN User Manual

Table 189 Call Parking Progression
CALLER A
Conversation between caller A and B continues

34.3.1 Configuring the Call Park Screen

Use this screen to configure call parking on the ISG50. Click Configuration > PBX > Call Service
> Call Park to open the screen.
Figure 355 Configuration > PBX > Call Service > Call Park
The following table describes the labels in this screen.
Table 190 Configuration > PBX > Call Service > Call Park
LABEL
Representative
Parking Extension
Number of Parking
Slots
Parking Expired
Time
Apply
Reset
ISG50 User's Guide
ISG50
5. The ISG50 parks the call and
informs caller B of the number to
call to reconnect to the call. This is
called the parking slot number.
DESCRIPTION
Enter the telephone number users should dial to park a telephone call. You can use 3-8
digits.
Enter the total number of call parking slot extensions to make available. This also
establishes the range of numbers that users will have to dial to retrieve a parked call. You
can use 1-99 positions.
Enter the maximum number of seconds that a call can be parked. After a parked call
exceeds this amount of time, it will ring back to the extension that parked the call. The
range you can use is 60-300 seconds.
Click this to save your changes and to apply them to the ISG50.
Click this to set every field in this screen to its last-saved value.
Chapter 34 Call Services
CALLER B
6. Caller B walks to another
extension and reconnects to the
call with A by dialing the parking
slot number.
535