ZyXEL Communications ISG50-ISDN User Manual page 813

Table 328 Routing Protocol Logs (continued)
LOG MESSAGE
Invalid OSPF virtual-
link %s authentication
of area %s.
Invalid OSPF md5
authentication on
interface %s.
Invalid OSPF text
authentication on
interface %s.
Interface %s does not
belong to any OSPF
area.
Invalid OSPF
authentication of area
%s on interface %s.
Table 329 NAT Logs
LOG MESSAGE
The NAT range is full
%s FTP ALG has
succeeded.
Extra signal port of
FTP ALG has been
modified.
Signal port of FTP ALG
has been modified.
%s H.323 ALG has
succeeded.
Extra signal port of
H.323 ALG has been
modified.
Signal port of H.323
ALG has been modified.
Register H.323 ALG
extra port=%d failed.
Register H.323 ALG
signal port=%d failed.
Register FTP ALG extra
port=%d failed.
Register FTP ALG
signal port=%d failed.
ISG50 User's Guide
DESCRIPTION
Virtual-link %s authentication has been set to same-as-area but the
area has invalid authentication configuration. %s: Virtual-Link ID
Invalid OSPF md5 authentication is set on interface %s. %s:
Interface Name
Invalid OSPF text authentication is set on interface %s. %s: Interface
Name
Interface %s has been set OSPF authentication same-as-area,
however the interface does not belong to any OSPF area. %s:
Interface Name
Interface %s has been set OSPF authentication same-as-area,
however the area has invalid text authentication configuration. %s:
Interface Name
DESCRIPTION
The NAT mapping table is full.
The FTP Application Layer Gateway (ALG) has been turned on or off.
%s: Enable or Disable
Extra FTP ALG port has been changed.
Default FTP ALG port has been changed.
The H.323 ALG has been turned on or off. %s: Enable or Disable
Extra H.323 ALG port has been changed.
Default H.323 ALG port has been changed.
H323 ALG apply additional signal port failed.
%d: Port number
H323 ALG apply signal port failed.
%d: Port number
FTP ALG apply additional signal port failed.
%d: Port number
FTP ALG apply signal port failed.
%d: Port number
Appendix A Log Descriptions
813