Starting And Stopping The Isg50 - ZyXEL Communications ISG50-ISDN User Manual

Web Configurator
The Web Configurator allows easy ISG50 setup and management using an Internet browser. This
User's Guide provides information about the Web Configurator.
Figure 11 Managing the ISG50: Web Configurator
Command-Line Interface (CLI)
The CLI allows you to use text-based commands to configure the ISG50. You can access it using
remote management (for example, SSH or Telnet) or via the console port. See the Command
Reference Guide for more information about the CLI.
Console Port
You can use the console port to manage the ISG50 using CLI commands. See the Command
Reference Guide for more information about the CLI.
The default settings for the console port are as follows.
Table 2 Console Port Default Settings
SETTING
Speed
Data Bits
Parity
Stop Bit
Flow Control

1.7 Starting and Stopping the ISG50

Here are some of the ways to start and stop the ISG50.
ISG50 User's Guide
VALUE
115200 bps
8
None
1
Off
Chapter 1 Introducing the ISG50
35