ZyXEL Communications ISG50-ISDN User Manual page 782

Integrated service gateway
Hide thumbs Also See for ISG50-ISDN:
Table of Contents

Advertisement

Appendix A Log Descriptions
Table 311 PBX SIP Logs (continued)
LOG MESSAGE
Call rejected due to
SDP issue (Got "488 Not
acceptable here").
Call rejected due to
unacceptable codecs..
Call rejected due to
callee does not support
required crypto.
Call rejected due to no
compatible codecs.
The call to device %s
is rejected due to PBX
service unavailable.
Call rejected due to no
one pick up call for %s
in pick up group.
Call rejected due to
can not find call (no
channel).
The call %s peer '%s'
was rejected due to the
call reaches the call
limit of %d.
The call is failed due
to no compatible
codecs.
Extension '%s' was
unregistered due to
time expired.
Extension '%s'
requested to
unregister.
The expire time is set
as %d due to extension
%s is behind NAT.
Extension '%s'
registered successfully
at %s with expire time
%d.
SIP trunk registered
successfully to
'%s@%s'.
782
DESCRIPTION
There was an SDP processing error.
The call was rejected because of unacceptable codecs (received a
488 Not acceptable here SIP reply).
The target does not support required encryption.
The call was rejected due to a codec error.
The call was rejected because the PBX service was unavailable.
1st %s: Called number
No one picked up the listed call.
1st %s: Call ID
Unable to create or find the SIP channel for this INVITE.
The call was rejected because it exceeded the call limit.
1st %s: Call direction, "from" or "to"
2nd %s: Peer name
%d: Call limit
The call was not accepted because there were no compatible
codecs.
The SIP peer was deregistered because its time expired.
1st %s: Peer name
The SIP peer deregistered.
1st %s: Peer name
The device is behind NAT and its expire time is {Expire_time}.
1st %d: Expire time
Peer registered successfully with the expire time {Expire_time}.
1st %s: Peer name
2nd %s: IP or hostname
1st %d: Expire time
The SIP trunk registered successfully to the listed user name and
host name.
1st %s: User name
2nd %s: Host name
ISG50 User's Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Isg50

Table of Contents