Add Or Edit Custom Music On Hold; The Call Transfer Screen - ZyXEL Communications ISG50-ISDN User Manual

34.6.1 Add or Edit Custom Music On Hold

Use this screen to create or edit a music on hold profile and upload an audio file to it.
In the Configuration > PBX > Call Service > Music On Hold screen, click Add or Edit to open
the screen as shown.
Figure 361 Add Customized Music on Hold
The following table describes the labels in this screen.
Table 196 Add Customized Music on Hold
LABEL
Name
Description
Upload Music File
Audio File State
OK
Cancel

34.7 The Call Transfer Screen

Call Transfer allows you to transfer an incoming call (that you have answered) to another phone by
doing the following.
Dial a predefined feature code (for example, *96 by default) followed by the number to which you
1
want to transfer the call to operate the intercom. See more feature code information in
on page 433.
After you hear the ring signal or the second party answers it, hang up the phone.
2
ISG50 User's Guide
DESCRIPTION
Enter a name for the music on hold profile.
Enter a description for the music on hold profile.
Click Browse to locate an audio file to be used as the auto-attendant greeting message,
and Upload to copy it to IP-PBX.
The audio files you upload must meet the following criteria:
• PCM format, 16 kHz, 16-bit, mono mode (*.wav).
• The total play time of all the music files combined must be less than 30 minutes.
This indicates whether an audio file has been uploaded to the ISG50 or not. You can also
Playback the audio file to hear how it sounds.
Click OK to save your customized settings and exit this screen.
Click Cancel to exit this screen without saving.
Chapter 34 Call Services
Section 27.3
541