After five minutes, log in again and check your new firmware version in the HOME screen.
If the upload was not successful, the following message appears in the status bar at the bottom of
the screen.
Figure 496 Firmware Upload Error
55.4 The Shell Script Screen
Use shell script files to have the ISG50 use commands that you specify. Use a text editor to create
the shell script files. They must use a ".zysh" filename extension.
Click Maintenance > File Manager > Shell Script to open the Shell Script screen. Use the
Shell Script screen to store, name, download, upload and run shell script files. You can store
multiple shell script files on the ISG50 at the same time.
Note: You should include write commands in your scripts. If you do not use the write
command, the changes will be lost when the ISG50 restarts. You could use multiple
write commands in a long script.
Figure 497 Maintenance > File Manager > Shell Script
ISG50 User's Guide
Chapter 55 File Manager
733